Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

stabuterm gh 462

Homepage > products > klüber > stabuterm gh 462
Categories
  • chemicals and solvents
    • STABUTERM GH 462
    STABUTERM GH 462
    STABUTERM GH 462

    stabuterm gh 462

    High-temperature lubricating greases.

    STABUTHERM GH 461 and STABUTHERM GH 462 are hightemperature lubricating greases based on mineral oil and polyurea. They have a wide service temperature range and can be applied in rolling bearings up to 180°C. If the lubricant is used in central lubrication systems, operating temperatures up to 200°C are possible. STABUTHERM GH 461 and STABUTHERM GH 462 feature highly effective anti-wear properties. The greases are very adhesive and resistant to water both under static and dynamic load. STABUTHERM GH 461 and STABUTHERM GH 462 are resistant to oxidation and provide reliable protection against corrosion.

    STABUTHERM GH 461 and STABUTHERM GH 462 are particularly suitable for applications in smelting works and rolling mills, especially for high-temperature lubrication points supplied through a central lubrication system, e.g.

    • drive rollers in continuous casting installations (slabs and billets)
    • conveyor rollers in continuous furnaces

    Lubricants for such applications must meet extremely high requirements regarding operating temperature, scaling, water and ensuing corrosion.

    STABUTHERM GH 461 and STABUTHERM GH 462 are also suitable for other high-temperature applications, such as:

    • annealing furnaces, drying stoves
    • plain bearings in foundry cranes
    • hot rolls in cardboard manufacturing plants
    • road tarmacking machines
    • shut-off gates in bulk material installations
    • cooling beds, conveyor systems
    • rotary kilns
    • machines and installations in the automotive, beverage, glass and ceramics industries

    STABUTHERM GH 461 and STABUTHERM GH 462 can be pumped through all common types of lubrication systems.

    Pipe friction values were determined in order to assess the pumpability in central lubrication systems.

    The results obtained at different temperatures are illustrated in diagrams 1 and 2 on pages 3 and 4.

    Diagram 1 shows the resistance to pumping per meter of pipe with a diameter of 7 mm; diagram 2 shows the values of a pipe with a diameter of 16 mm.

    The pipe friction values were measured with a Shell DELIMON rheometer system.

    Reduction of lubricant costs due to

    • lower consumption
    • reduced waste water disposal costs due to excellent water resistance

    Longer component life and trouble-free operation due to

    • good wear protection, good load- carrying capacity even at high temperatures
    • excellent corrosion protection

    Proven pumpability and metering in central lubrication systems

    Characteristics STABUTHERM GH 461 STABUTHERM GH 462
    Article number 020500 020511
    Composition, thickener polyurea polyurea
    Composition, type of oil mineral oil mineral oil
    Colour space beige beige
    Texture homogeneous , long fibrous homogeneous , long fibrous
    Service temperature, lower limit -20 °C -10 °C
    Service temperature, upper limit, in case of continuous lubrication 180 °C 180 °C
    NSF H2 registration number 135680  -
    NLGI grade, DIN 51818 1 2
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx 31.5 mm²/s approx 31.5 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx 490 mm²/s  approx 490 mm²/s
    Copper corrosion, DIN 51811, 24 h, 120°C 1 - 120 - 24 corrosion degree 1 - 120 - 24 corrosion degree
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree ≤ 1 corrosion degree 
    Flow pressure, DIN 51805-2, -10°C  - ≤ 1400 mbar
    Flow pressure, DIN 51805-2, -20°C ≤ 1400 mbar  -
    Dropping point, DIN ISO 2176 / IP 396 ≥ 240 °C ≥ 240 °C
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months 36 months
    kluber-stabutherm-gh-462.pdfkluber-stabutherm-gh-462-en.pdf
    kluber-stabutherm-gh-462.pdfkluber-stabutherm-gh-462-en.pdf