Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

staburags nbu 12 k

Homepage > products > klüber > staburags nbu 12 k
Categories
  • chemicals and solvents
    • STABURAGS NBU 12 K

    staburags nbu 12 k

    Rolling and plain bearing greases.

    STABURAGS NBU 12 K, 30 K are lubricating greases based on mineral oil and barium complex soap. Both greases offer excellent corrosion protection, resistance to water and ambient media as well as wear protection, load-carrying capacity and resistance to tribocorrosion.

    • STABURAGS NBU 12 K is suitable for the long-term and lifetime lubrication of medium-speed rolling bearings, e.g. in mechanical engineering, power stations and motors. STABURAGS NBU 30 K is suitable for the long-term and lifetime lubrication of low-speed, highly loaded rolling and plain bearings, mechanical engineering, chemical industry and power stations.
    • These greases are applied by brush, spatula or conventional metering systems.
    • Good corrosion protection
    • Excellent resistance to ambient media
    • High wear protection
    • Good resistance to tribo-corrosion
    • Good load-carrying capacity
    • Good sealing effect
    Characteristics  STABURAGS NBU 12 K STABURAGS NBU 30 K
    Article number 017085 017025
    Composition, thickener barium complex soap barium complex soap
    Composition, type of oil  mineral oil mineral oil
    Colour space brown beige
    Service temperature, lower limit -15 °C -10 °C
    Service temperature, upper limit 130 °C 130 °C
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 245 0.1 mm 245 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 275 0.1 mm  275 0.1 mm
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 19 mm²/s approx. 31 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 220 mm²/s approx. 490 mm²/s
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h 0 corrosion degree 0  corrosion degree
    Low temperature torque, IP 186, -10°C, running torque  - ≤ 100 mNm
    Low temperature torque, IP 186, -10°C, starting torque  - ≤ 1000 mNm
    Low temperature torque, IP 186, -15°C, running torque ≤ 100 mNm  -
    Low temperature torque, IP 186, -15°C, starting torque ≤ 1000 mNm  -
    Dropping point, DIN ISO 2176 / IP 396  ≥ 220 °C ≥ 220 °C
    Speed factor (n x dm) approx. 350000 mm/min approx. 250000 mm/min
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 60 months 60 months

     

    kluber-staburags-nbu-12-k.pdfkluber-staburags-nbu-12-k-en.pdf
    kluber-staburags-nbu-12-k.pdfkluber-staburags-nbu-12-k-en.pdf