Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

paraliq ga 351

Homepage > products > klüber > paraliq ga 351
Categories
  • chemicals and solvents
    • PARALIQ GA 351

    paraliq ga 351

    Special lubricating grease for the food and pharmaceutical industries.

    PARALIQ GA 351 is a versatile lubricating grease based on an aluminium complex soap thickener.

    PARALIQ GA 351 has no smell or taste. It is resistant to all aqueous or alcoholic media commonly found in the food industry.

    Owing to its consistency, PARALIQ GA 351 can normally be applied by means of centralised lubricating systems also at low temperatures. Please note, however, that due to different system configurations and application conditions the pumpability of the product has to be confirmed with the system manufacturer for each individual application. We will be pleased to provide assistance in this matter.

    PARALIQ GA 351 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the foodprocessing, cosmetics, pharmaceutical or animal feed industries.

    The use of PARALIQ GA 351 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

    PARALIQ GA 351 can be used for all lubrication points in the food industry.

    Application examples

    • Rolling and plain bearings in machines of the food and pharmaceutical industries
    • Metering pistons in cup filling and sealing machines
    • Tubular tracks in slaughterhouses

    Clean all lubrication points lubricated with a different grease before applying PARALIQ GA 351. If the greases are miscible, relubrication with PARALIQ GA 351 is sufficient.

    The grease is applied by spatula, brush, grease gun or similar equipment. Avoid over-lubrication. The friction points can be cleaned with a commercial cleaning agent.

    This product is also available in our automatic lubricant dispenser Klübermatic. Please consult the application engineering experts from Klüber Lubrication to determine whether Klübermatic might be used under the conditions in your processes.

    • Versatile lubricating grease reducing the number of different lubricants required on site
    • Reduced loss of lubricant due to its resistance to aggressive media
    • Increased process reliability due to excellent hot water resistance
    • ISO 21469 certified – supports the compliance with the hygienic requirements in your production.
    Characteristics PARALIQ GA 351
    Article number  096020
    Colour space beige
    Service temperature, lower limit -25 °C
    Service temperature, upper limit 110 °C
    NSF H1 registration number  056370
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 300 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit  320 0.1 mm
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx 22 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx  230 mm²/s
    Water resistance, DIN 51807-1, based on standard, 3 h, 50°C 1 - 50 rating
    Water resistance, DIN 51807-1, 3 h, 90°C 1 - 90 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months

     

    kluber-paraliq-ga-3511.pdfkluber-paraliq-ga-351-en1.pdf
    kluber-paraliq-ga-3511.pdfkluber-paraliq-ga-351-en1.pdf