Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

klubersynth bep 72-82

Homepage > products > klüber > klubersynth bep 72-82
Categories
  • chemicals and solvents
    • KLUBERSYNTH BEP 72-82
    KLUBERSYNTH BEP 72-82
    KLUBERSYNTH BEP 72-82

    klubersynth bep 72-82

    Klübersynth BEP 72-82 is based on polyurea and ester oil. The special additives were chosen with a view to preventing premature bearing failure due to material fatigue, which often occurs at high temperatures combined with high speeds and vibrations. The service life of bearings is extended owing to the lubricant's excellent, longterm corrosion protection characteristics.

    • Klübersynth BEP 72-82 was especially developed for rolling bearings typically used in motor vehicles. Due to its performance characteristics Klübersynth BEP 72-82 can be used for the lifetime lubrication of many bearings, e.g. belt tensioner bearings (with rotating outer ring), clutch release bearings, viscous coupling bearings, drive shaft bearings, radiator fan bearings as well as deep groove ball bearings used in various types of electric motors and in all other bearings subject to high speeds and loads.
    • Klübersynth BEP 72-82 can be applied to the bearing by standard metering systems as well as by simple equipment such as brush, spatula or grease gun. Ideally, the bearing should be metallically blank. The product is normally suitable for central lubricating systems. Please note, however, that due to different system configurations and application conditions the pumpability of the product has to be confirmed with the system manufacturer for each individual application. We will be pleased to provide assistance in this matter.
    • If an anticorrosive fluid has been applied prior to greasing, we recommend checking compatibility with the lubricant.
    • Long service life of bearing due to special antiwear additives protecting against premature material fatigue as may be caused by vibrations, high temperatures and speeds
    • Protects against corrosion damage due to excellent additives
    Characteristics Klübersynth BEP 72-82
    Article number 094092
    Composition, thickener polyurea
    Composition, type of oil ester oil
    Colour space beige
    Service temperature, lower limit -40 °C
    Service temperature, upper limit 180 °C
    Density, Klüber method: PN 024, 20°C approx. 0.9 g/cm³
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, difference after 100000 double strokes ≤ 60 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 250 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 280 0.1 mm
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 11 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 80 mm²/s
    Copper corrosion, DIN 51811, 24 h, 100°C 1 - 100 - 24 corrosion degree
    SKF-EMCOR, DIN 51802, based on standard, Klüber method: 5 % NaCl solution, 168 h h ≤ 3 corrosion degree
    Flow pressure, DIN 51805-2, -40°C ≤ 1400 mbar
    Dropping point, DIN ISO 2176 / IP 396 ≥ 250 °C
    Speed factor (n x dm) 1000000 mm/min
    Water resistance, DIN 51807-1, 3 h, 90°C ≤ 1 - 90 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months

     

    klubersynth-bep-72-82.pdf