Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Social Media

kluberlub be 41-542

High loads and shocks can damage rolling bearings and lead to their premature failure. To prevent this, we developed Klüberlub BE 41-542 on the basis of highly viscous mineral oil, lithium special soap, EP/AW and anticorrosive additives. This selected combination makes Klüberlub BE 41-542 a preferred choice for numerous applications involving high loads.

Typical Klüberlub BE 41-542 applications are in high-load roller bearings operating at low to medium speeds such as for

  • load rollers in rotary kilns for the cement industry
  • crane wheels
  • bucket wheel excavators
  • hammer crushers, hammer mills
  • work rolls in hot strip mills
  • cold pilger rolling mills
  • rolling bearings subject to shock or pulsating stress
  • shock absorbers in washing machines

The ambient temperature should be ≥ 15 °C when applying the product with an automatic grease pump.

  • Good pressure absorption capacity
  • Very good wear protection
  • High corrosion protection
  • Strong adhesiveness
Characteristics Klüberlub BE 41-542
Article number 020269
Composition, thickener lithium complex soap
Composition, type of oil mineral oil
Colour space brown
Texture homogeneous
Service temperature, lower limit -20 °C
Service temperature, upper limit 140 °C
Density, Klüber method: PN 024, 20°C approx. 0.93 g/cm³
NLGI grade, DIN 51818 2
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit  265 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 295 0.1 mm
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 28 mm²/s
Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 540 mm²/s
SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h  ≤ 1 corrosion degree
Flow pressure, DIN 51805-2, -20°C ≤ 1400 mbar
Dropping point, DIN ISO 2176 / IP 396 ≥ 230 °C
FAG FE9 rolling bearing test, DIN 51821-2, 1500 / 6000-140, service life F50 ≥ 100 h
Four-ball tester, welding load, DIN 51350-4  ≥ 3000 N
Speed factor (n x dm) approx. 500000 mm/min
Water resistance, DIN 51807-1, 3 h, 90°C ≤ 1 - 90 rating
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months