Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

kluberbio rm 2

Homepage > products > klüber > kluberbio rm 2
Categories
  • chemicals and solvents
    • KLUBERBIO RM 2

    kluberbio rm 2

    Environmentally compatible, synthetic stern tube oils.

    Klüberbio RM 2 oils are ultimately biodegradable oils for stern tubes based on synthetic ester oil showing very good ageing and oxidation stability.

    Klüberbio RM 2 oils show a high shear stability and form a strong hydrodynamic oil film even when subject to high loads. As the lubricants are biodegradable oil loss or leakage are less dangerous to the environment. Klüberbio RM 2 oils contain > 90 % of renewable raw materials and bear the European Ecolabel.

    Attaining EU Ecolabel certification provides ship owners and/or operators with independent assurance that the product achieves the U.S. EPA's requirements for classification as an Environmentally Acceptable Lubricant (EAL). Therefore, these high-performance lubricants meet the biodegradability, minimally toxic, and nonbioaccumulating standards set in Appendix A of the U.S. EPA's VGP.

    The EU Ecolabel is a label of environmental excellence that is awarded to products and services meeting high environmental standards throughout their life cycle: from raw material extraction, to production, distribution and disposal.

    • Klüberbio RM 2 oils were developed for the lubrication of propeller bushes made of white metal and propeller shaft seals.
    • Klüberbio RM 2 oils are tested and approved by all leading propeller shaft seal manufacturers.
    • Please contact Klüber Lubrication or the seal manufacturer for technical consultation on your specific seal-lubricant combination.
    • In general, Klüberbio RM 2 oils are miscible with mineral oil based stern tube lubricants. However, a miscibility test should be performed in order to totally rule out the possibility of an incompatibility between different additives. Prior to changeover, we recommend flushing the stern tube with the Klüberbio RM 2 oil.
    • Klüberbio RM 2 oils need to be approved by the OEMs of your propeller shaft seal or bearing. In case the oil has not yet been approved or the specification of the seal or bearing has been changed - e.g. type, design or material - we recommend consulting the OEM prior to the oil change.
    • Owing to the many different elastomer compositions of seals we recommend - prior to series application - checking the compatibility and other influencing factors that are relevant for the application with the component under conditions similar to practice.
    • Comply with the requirements for Environmentally Acceptable Lubricants as defined in Appendix A of the EPA 2013 VGP (Vessel General Permit)
    • Ultimately biodegradable and not toxic to marine organisms with more than 90% renewable raw materials
    • High operational reliability due to the formation of a strong, hydrodynamic oil film and a very good compatibility with FKM elastomers available from leading propeller shaft seal manufacturers.
    Characteristics  Klüberbio RM 2-100 Klüberbio RM 2-150
    Article number 009031 009025
    Service temperature, lower limit -25 °C -25 °C
    Service temperature, upper limit 120 °C 120 °C
    EU Ecolabel registration number  DE/027/261 DE/027/262
    Biodegradability, OECD 301 F, 28, within days ≥ 60 % ≥ 60 %
    Density, DIN 51757, 20°C approx. 0.94 g/cm³ approx. 0.92 g/cm³
    Flash point, DIN EN ISO 2592, Cleveland open cup ≥ 230 °C ≥ 250 °C
    ISO viscosity grade, DIN ISO 3448, ISO VG 100 150
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 14 mm²/s approx. 18 mm²/s
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 100 mm²/s approx. 150 mm²/s
    Viscosity index, DIN ISO 2909 approx. 137 approx. 135
    Copper corrosion, DIN EN ISO 2160, 24 h, 100°C 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree
    Steel corrosion, DIN ISO 7120 / ASTM D665, method A, 24 h, 60°C rust-free rust-free
    Pour point, DIN ISO 3016 ≤ -30 °C ≤ -30 °C
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months 36 months

     

    kluberbio-rm-2.pdfkluberbio-rm-2-en.pdf
    kluberbio-rm-2.pdfkluberbio-rm-2-en.pdf