Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

kluberbio eg 2

Homepage > products > klüber > kluberbio eg 2
Categories
  • chemicals and solvents
    • KLUBERBIO EG 2

    kluberbio eg 2

    Environmentally compatible, synthetic high-performance gear oils.

    Klüberbio EG 2 oils are ultimately biodegradable gear oils based on synthetic ester oil. They contain ≥90 % of renewable raw materials.

    Klüberbio EG 2 oils show a high shear stability and form a strong hydrodydamic oil film even when subject to high loads. They have a high scuffing resistance, protecting gear teeth reliably against fretting damage even at high peak loads.

    Klüberbio EG 2 oils achieve the U.S. EPA's requirements for classification as an Environmentally Acceptable Lubricant (EAL).

    Therefore, these high-performance lubricants meet the biodegradability, minimally toxic, and non-bioaccumulating standards set in Appendix A of the U.S. EPA's 2013 VGP (Vessel General Permit).

    Klüberbio EG 2-150 also complies with the European Ecolabel.

    The EU Ecolabel is a label of environmental excellence that is awarded to products and services meeting high environmental standards throughout their life cycle: from raw material extraction, to production, distribution and disposal.

    • Klüberbio EG 2 oils were developed for the lubrication of ships’ gearboxes, particularly for thrusters and rudder propellers. Leading manufacturers of thrusters and propeller shaft seals have tested and approved these oils.
    • Please contact Klüber Lubrication or the manufacturer of the seal or thruster for technical consultation on your specific seal-lubricant combination.
    • Klüberbio EG 2 oils protect rolling elements effectively against wear and pitting, thus complying with the requirements of rolling bearing manufacturers for highly loaded, large rolling bearings in pod drives.
    • Klüberbio EG 2-68, 100 and 320 oils can also be used for the lubrication of open-running drive and conveyor chains, e.g. in installations and machines in agriculture, forestry and water resources industries as well as for horticultural appliances.
    • In general, our completely biodegradable high-performance gear oils are miscible with mineral oils and synthetic hydrocarbons. However, a miscibility test should be performed in order to totally rule out the possibility of an incompatibility between different additives. Prior to changeover, we recommend cleaning the lube points or flushing the gear with the Klüberbio EG 2 oil to be used.
    • The Klüberbio EG 2 oil to be used needsto be approved by the OEMs of the equipment. In case the oil is not approved or the equipment's specification has been changed - e.g. type, design or material of the sealing - we recommend consulting the OEM prior to the oil change.
    • Owing to the many different elastomer compositions of seals we recommend - prior to series application - checking the compatibility and other influencing factors (e.g. maximum admissible water content in the oil) with the component under conditions similar to practice.
    • Complies with the requirements for environmentally friendly lubricants (according to VGP 2013 Annex A)
    • It is completely biodegradable. It is non-toxic to marine organisms; thus reducing the environmental impact in case of leakage.
    • Klüberbio EG 2 oils have high friction resistance and protect gears against wear even at high peak loads.
    • Standard NBR and FKM elastomers from leading manufacturers of propeller shaft seals are resistant and approved to Klüberbio EG 2 oils, preventing leaks and dirt.
    Characteristics Klüberbio EG 2-68 Klüberbio EG 2-100 Klüberbio EG 2-150 Klüberbio EG 2-320
    Article number 009043 009039 009030 009057
    Colour space yellow yellow  - yellow
    Service temperature, lower limit -25 °C -25 °C -25 °C -25 °C
    Service temperature, upper limit 120 °C 120 °C 120 °C 120 °C
    Conformance, CLP, DIN 51517-3 passed passed passed  -
    Designation, DIN 51502  CLP E 68 CLP E 100 CLP E 150 CLP E 320
    EU Ecolabel registration number  -  - DE/027/260  -
    Biodegradability, OECD 301 F, 28, within days ≥ 60 % ≥ 60 % ≥ 60 % ≥ 60 %
    Density, DIN 51757, 15°C approx 909 kg/m³ approx 919 kg/m³ approx 927 kg/m³ approx 943 kg/m³
    Flash point, DIN EN ISO 2592, Cleveland open cup ≥ 260 °C ≥ 280 °C ≥ 280 °C ≥ 270 °C
    Foam test, ISO 6247 / ASTM D892, 24°C, sequence I ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml
    Foam test, ISO 6247 / ASTM D892, 24°C, sequence III ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml
    Foam test, ISO 6247 / ASTM D892, 93.5°C, sequence II ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml ≤ 100/10 ml
    ISO viscosity grade, DIN ISO 3448, ISO VG 68 100 150 320
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx 11 mm²/s approx 14 mm²/s approx 18 mm²/s approx 34 mm²/s
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx 68 mm²/s approx 100 mm²/s approx 150 mm²/s approx 320 mm²/s
    Viscosity index, DIN ISO 2909 approx 140 approx  140 approx 135 approx 150
    Copper corrosion, DIN EN ISO 2160, 24 h, 100°C 1 - 100 - 24
    corrosion degree    		 1 - 100 - 24
    corrosion degree    		 1 - 100 - 24
    corrosion degree    		 1 - 100 - 24
    corrosion degree
    Steel corrosion, DIN ISO 7120 / ASTM D665, method A, 24 h, 60°C rust-free rust-free rust-free rust-free
    Pour point, DIN ISO 3016 ≤ -25 °C ≤ -25 °C ≤ -25 °C ≤ -25 °C
    FAG FE8 rolling bearing test, DIN 51819-3, D-7.5 / 80-80, wear of cage ≤ 200 mg  -  -  -
    FAG FE8 rolling bearing test, DIN 51819-3, D-7.5 / 80-80, wear of rolling elements ≤ 30 mg  -  -  -
    FZG scuffing test, DIN ISO 14635-1, A / 8.3 / 90, failure load stage > 13 > 13 > 13 > 13
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months 36 months 36 months 36 months

     

    kluberbio-eg-2-en.pdf
    kluberbio-eg-2-en.pdf