Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

kluberbeta vr 67-17002

Homepage > products > klüber > kluberbeta vr 67-17002
Categories
  • chemicals and solvents
    • KLUBERBETA VR 67-17002
    KLUBERBETA VR 67-17002

    kluberbeta vr 67-17002

    Klüberbeta VR 67-17002 is a pasty, whitish special grease for valves and fittings. It is based on silicone oils which comply with drinking water regulations. It shows a high dynamic viscosity which is relatively insensitive to temperature.

    Klüberbeta VR 67-17002 is a thixotrope product, i.e. it behaves like a consistent lubricant when at rest, while under dynamic load it begins to flow. The product thus combines sufficient wetting of the friction point and hence sound lubrication with a good sealing effect and adhesion.

    Klüberbeta VR 67-17002 is NSF H1 registered and therefore complies with FDA 21 CFR § 178.3570. The lubricant was developed for incidental contact with products and packaging materials in the food-processing, cosmetics, pharmaceutical or animal feed industries. The use of Klüberbeta VR 67-17002 can contribute to increase reliability of your production processes. We nevertheless recommend conducting an additional risk analysis, e.g. HACCP.

    • Klüberbeta VR 67-17002 is suitable for drinking water and beverage taps as well as in heating installations, for example to improve the smooth operation of valves and fittings through defined actuating forces.
    • Typical applications include the lubrication of ceramic discs, e.g. in single lever mixer taps, piston mixers, plastic taps, valves, thermostats, press fit seals and similar components.
    • Klüberbeta VR 67-17002 generally provides load-bearing lubricating films up to 3 N/mm² under normal operating conditions in the industry.
    • Klüberbeta VR 67-17002 has proven particularly successful as assembly lubricant for seals, collars and seal packings in cold and hot water as well as steam applications.
    • Being a silicone grease, Klüberbeta VR 67-17002 shows mostly neutral behaviour towards most metals, thermoplastics and elastomers.
    • Nevertheless, we recommend that the grease’s compatibility with the materials in contact be checked, ideally using the complete component under series production conditions. All surfaces should be thoroughly cleaned and degreased prior to application. Afterwards, Klüberbeta VR 67-17002 can be applied by suitable application equipment, e.g. by brush, spatula, using the Tampoprint method, etc.

    Prolonged service life of cartridges, valves and fittings due to

    • continuous wetting of the friction surfaces
    • compatibility with most standard elastomers and plastics
    • friction and wear reduction in most material combinations

    Prevents stick-slip and provides balanced damping of operation

    • as temperature has little effect on lubricating film thickness
    • due to high base oil viscosity (effect on actuating forces)

    Certified for use in drinking water and beverage taps

    • according to UBA (German Environmental Agency) guideline BWGL-KTW, NSF/ANSI/CAN 61, WRAS, ACS, Belgaqua, AS 4020, NSF H1 - further certifications available on request

    NSF ISO 21469 certified - supports the compliance with the hygienic requirements in your production plant. 

    Characteristics Klüberbeta VR 67-17002
    Article number 022225
    Composition, thickener silicate
    Composition, type of oil silicone oil
    Colour space white
    Service temperature, lower limit -40 °C
    Service temperature, upper limit 160 °C
    NSF H1 registration number 144019
    Density, Klüber method: PN 024, 20°C approx. 1.05 g/cm³
    Unworked penetration, Klein, 25°C, lower limit 240 0.1 mm
    Unworked penetration, Klein, 25°C, upper limit 300 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 20000 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 46000 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 25°C approx. 17000 mm²/s
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 12 months

     

    kluberbeta-vr-67-17002.pdf