Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

hotemp 2000

Homepage > products > klüber > hotemp 2000
Categories
  • chemicals and solvents
    • HOTEMP 2000

    hotemp 2000

    HOTEMP 2000 is an advanced, fully synthetic high-temperature oil for friction points that are normally lubricated manually.

    HOTEMP 2000 is resistant to temperatures and does not decompose thermally into hard, lacquer-like residues that may stiffen or seize chain joints.

    • Thermally stable, for use up to approx. 230 °C
    • Good adhesion to friction points, long-term lubricating effect and low consumption
    • Good creeping and penetration, hence lower consumption and easy application
    • Resistant to centrifuging, therefore reduced risk of environmental contamination
    • Insoluble in water, good wash-off resistance
    Characteristics HOTEMP 2000
    Article number 002087
    Composition, type of oil ester oil , synthetic hydrocarbon oil
    Appearance clear
    Colour space green
    Service temperature, lower limit 0 °C
    Service temperature, upper limit 230 °C
    Flash point, DIN EN ISO 2592, Cleveland open cup ≥ 230 °C
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 126 mm²/s
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 2000 mm²/s
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 60 months

     

    kluber-hotemp-2000.pdf
    • HOTEMP 2000 is used for lubrication points subject to high thermal loads as are common in chains, slideways, gears, wire ropes, guideways or cams.
    • It is not washed off and penetrates well into chain joints and friction points.
    • HOTEMP 2000 is preferably used for temperatures up to approx. 230 °C. A durable, load-carrying lubricant film is attained even at these high temperatures.
    • HOTEMP 2000 can be applied manually by brush or automatically by drip feeders or a spray system.
    • Klüber will be pleased to provide information on suitable equipment. HOTEMP 2000 is also available as a spray (Art. No. 081133). When applied, HOTEMP 2000 forms a highly adhesive lubricant film that resists centrifuging and water wash-off.