Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

polylub gly

Homepage > products > kluber > polylub gly
Categories
  • chemicals and solvents
    • POLYLUB GLY
    POLYLUB GLY
    POLYLUB GLY

    polylub gly

    Special synthetic lubricating greases for a wide application range.

    The product series POLYLUB GLY 151, 501, 801 is based on a synthetic hydrocarbon oil, mineral oil and special lithium soap. It comprises three lubricating greases reducing friction and wear in plain bearings, slideways and small gears made of plastic.

    The lubrication of plastics is special in a number of ways. As the behaviour of metals and plastics differs in many aspects, the lubricants' properties have to be adjusted to the plastic. Compared to many metals, plastics are relatively soft. Solid lubricants, which may achieve a positive effect on many metal friction points, can have a negative or no effect at all on plastic lube points. With the formulation of POLYLUB GLY 151, 501, 801, Klüber Lubrication offers products which are free of solid lubricants, and offer good adhesion.

    Vehicles

    • Gearshift linkages, moving parts of the heating and ventilation system, shock absorber seals, tie rod elements, seat mechanisms, sun roof guides, pedals.

    Plain bearings

    • Many types of plain bearing designs. POLYLUB GLY 151, 501, 801 prevent stick-slip to a large extent, particularly in applications where normally a hydrodynamic lubricating film cannot form.

    Gears

    • Small electric gears with plastic-metal friction components, manual gears operating at very low sliding speeds.

    Pneumatic installations

    • Pneumatic valves and cylinders with and without piston rod (for these applications, the upper service temperature should not exceed 130 °C).

    Seals

    • Lubricating and sealing grease for various types of seals. The POLYLUB GLY 151, 501 and 801 lubricants are also suitable for many other plastic components subject to wear caused by relative movement against metal or plastic surfaces. Owing to good damping properties, especially of POLYLUB GLY 801 and 501, noise is considerably reduced.
    • For many applications in connection with various plastics and elastomers
    • Approved by many renowned manufacturers and suppliers in the automotive industry, e.g. DBL 6827.60, VW TL 52147, Brose Fettgruppe 11 and many more
    • The integrated UV indicator allows a reliable lubricant detection (wave length 366 nm) even with minimum quantity lubrication
    • Contributes to mechanical damping and noise reduction of switches and contacts.
    Characteristics POLYLUB GLY 151 POLYLUB GLY 501 POLYLUB GLY 801
    Article number 020235 020285 020199
    Composition UV additive UV additive UV additive
    Composition, thickener lithium complex soap lithium complex soap lithium complex soap
    Composition, type of oil mineral oil , synthetic
    hydrocarbon oil    		 mineral oil , synthetic
    hydrocarbon oil    		 mineral oil , synthetic
    hydrocarbon oil
    Colour space beige beige beige
    Service temperature, lower limit -50 °C -40 °C -40 °C
    Service temperature, upper limit 150 °C 150 °C 130 °C
    Density, Klüber method: PN 024, 20°C approx 0.85 g/cm³ approx 0.88 g/cm³ approx 0.88 g/cm³
    NLGI grade, DIN 51818 1 1 1
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 310 0.1 mm 310 0.1 mm 310 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 340 0.1 mm 340 0.1 mm 340 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 1800 mPas  3000 mPas 4000 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 3000 mPas 5000 mPas 8000 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx 18.5 mm²/s approx 40 mm²/s approx 60 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx 150 mm²/s approx 500 mm²/s approx 730 mm²/s
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree ≤ 1 corrosion degreei ≤ 1 corrosion degree
    Oil separation, ASTM D6184, 30 h, 100°C ≤ 6 by weight % ≤ 4 by weight % ≤ 4 by weight %
    Dropping point, DIN ISO 2176 / IP 396  ≥ 250 °C ≥ 250 °C ≥ 250 °C
    Oxidation stability, ASTM D942, 100 h, 99°C, pressure drop ≤ 0.3 bar  - ≤ 0.3 bar
    Water resistance, DIN 51807-1, 3 h, 90°C  ≤ 1 - 90 rating ≤ 1 - 90 rating ≤ 1 - 90 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months 36 months 36 months

     

    kluber-polylub-gly.pdfkluber-polylub-gly-en.pdf
    kluber-polylub-gly.pdfkluber-polylub-gly-en.pdf