PETAMO III 350

Lubrication of plain and rolling bearings subject to high temperatures and extended operation.
Initial and re-lubrication of load and return rollers in conveyor systems (drying, painting and enamel installations), fans and motors in drying systems.
PETAMO III/350 is applied by spatula, brush, grease gun and grease cartridge or via centralised lubrication systems.
Before substituting PETAMO III/350 for other greases it is necessary to clean new bearings. If both greases are miscible, the grease can be replaced by relubrication.

kluber-petamo-iii-350.pdf

Characteristics	PETAMO III 350
Article number	094021
Composition, thickener	polyurea
Composition, type of oil	ester oil
Colour space	beige
Texture	homogeneous , short fibrous
Service temperature, lower limit	-20 °C
Service temperature, upper limit	200 °C
Density, Klüber method: PN 024, 20°C	approx. 1.01 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	320 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	370 0.1 mm
Dropping point, DIN ISO 2176 / IP 396	≥ 250 °C
Speed factor (n x dm)	approx. 400000 mm/min
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.	36 months

Name and Surname

Company Name

Your E-Mail Address

Your Telephone Number

Your Message

I have read and understood the Kvkk and Information Text.