MICROLUBE GB 0

MICROLUBE GB 0 was especially developed for friction points subject to high loads and mixed friction conditions. It is a universal grease suitable for the lubrication of eccentric presses (e.g. make Müller-Weingarten), heavy-duty spur and bevel gears with steel/steel components (e.g. gear motors that are not oiltight), slideways, guides and sump lubricated rolling bearings.
MICROLUBE GB 0 is applied by brush, spatula, grease gun or centralized lubrication system. Immersion lubrication of gears is possible up to a peripheral speed of approx. 3 m/s or via forcedfeed lubrication

Characteristics	MICROLUBE GB 0
Article number	020232
Appearance	transparent
Colour space	red
Texture	homogeneous
Density, Klüber method: PN 024, 20°C	approx 0.9 g/cm³
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit	355 0.1 mm
Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit	approx 3000 mPas
Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹	approx 31.5 mm²/s
Kinematic viscosity of the base oil, 100°C, calculated data	approx 590 mm²/s
Kinematic viscosity of the base oil, 40°C, calculated data	< 1400 mbar
Flow pressure, DIN 51805-2, -25°C	< 1400 mbar
Dropping point, DIN ISO 2176 / IP 396	> 180 °C
FZG scuffing test, DIN ISO 14635-3, based on standard, A / 2.8 / 50, failure load stage	≥ 12
Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx	36 months

kluber-microlube-gb-0.pdf kluber-microlube-gb-0-en.pdf

Name and Surname

Company Name

Your E-Mail Address

Your Telephone Number

Your Message

I have read and understood the Kvkk and Information Text.