Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.
Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye
Klübersynth J 44-402 consists of fully synthetic base oil, lithium soap and additives increasing the ageing resistance and the corrosion protection of steel surfaces. Special additives increase adhesion on steel and plastic components, improve the dampening effect between the friction bodies and reduce the breakaway and running torques in ball joints. Klübersynth J 44-402 has been designed to reduce slick-slip and to keep friction values and the difference between static and dynamic friction as low as possible. The usual seal materials like chlorobutadiene rubber (CR) were taken into consideration when developing the grease. Prior to series application we recommend testing the compatibility with the elastomers and plastics used.
Low breakaway and running torques even after 24 hours of inoperative position
Particularly low friction values
Good low-temperature behaviour
| Characteristics | Klübersynth J 44-402 |
| Article number | 004263 |
| Composition, thickener | lithium soap |
| Composition, type of oil | synthetic hydrocarbon oil |
| Colour space | beige |
| Service temperature, lower limit | -40 °C |
| Service temperature, upper limit | 130 °C |
| Density, Klüber method: PN 024, 20°C | approx. 0.9 g/cm³ |
| NLGI grade, DIN 51818 | 2 |
| Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C | approx. 360 mm²/s |
| SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h | ≤ 1 corrosion degree |
| Flow pressure, DIN 51805-2, -40°C | ≤ 1400 mbar |
| Dropping point, DIN ISO 2176 / IP 396 | ≥ 185 °C |
| Water resistance, DIN 51807-1, 3 h, 90°C | 1 - 90 rating |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 24 months |
EN 
TR