Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

klubersynth hm 2-220

Homepage > products > kluber > klubersynth hm 2-220
Categories
  • chemicals and solvents
    • KLUBERSYNTH HM 2-220
    KLUBERSYNTH HM 2-220

    klubersynth hm 2-220

    High-temperature oil for the glass industry.

    Klübersynth HM 2-220 is a synthetic high-temperature oil especially developed for the glass industry. Besides the normal temperature range, Klübersynth HM 2-220 is especially suitable for the hightemperature range because its evaporation loss at elevated temperatures is very low. The product has good penetration properties and forms a lubricant film very quickly. Klübersynth HM 2- 220 is free from solids, which helps to avoid sedimentation.

    • Klübersynth HM 2-220 is suitable for all IS machines. It can be used for all friction points in the normal and high-temperature sections which are lubricated through a centralized lubrication system. In addition, Klübersynth HM 2-220 is suitable for conveyor and cross belt chains which are lubricated by means of oil spray systems, drip oilers, centralized lubrication system, or by hand (oil feeder/brush).
    • Keeping the friction point always covered with Klübersynth HM 2- 220 ensures good wear protection and prevents impeded operation and residues. To achieve optimum efficiency it is important not to mix Klübersynth HM 2-220 with other oils
    • Lower oil costs due to lower consumption
    • Lower waste water disposal costs due to excellent water separation ability
    • Much less machine contamination, hence lower cleaning costs
    • Smooth machine operation due to good pumpability and precise metering by centralised lubricating systems
    • Higher machine efficiency due to uninterrupted operation with higher output
    • Higher machine reliability due to less residue formation
    • Less machine wear also at high temperatures
    • No starting-up problems, restart of cooled-down machine 20% to 30% faster thanks to good temperature-viscosity behaviour
    • Changeover to Klübersynth HM 2-220 easy as miscible with mineral oil
    Characteristics Klübersynth HM 2-220
    Article number 002115
    Composition, type of oil  ester oil , synthetic hydrocarbon oil
    Appearance clear
    Colour space yellow
    Service temperature, upper limit  250 °C
    Density, DIN 51757, 20°C approx. 0.92 g/cm³
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C  approx. 25 mm²/s
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 220 mm²/s
    Four-ball tester, welding load, DIN 51350-2 ≥ 2200 N
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36  months

     

    klubersynth-hm-2-220.pdfklubersynth-hm-2-220-en.pdf
    klubersynth-hm-2-220.pdfklubersynth-hm-2-220-en.pdf