Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

klubersynth h 46-702

Homepage > products > kluber > klubersynth h 46-702
Categories
  • chemicals and solvents
    • KLUBERSYNTH H 46-702
    KLUBERSYNTH H 46-702

    klubersynth h 46-702

    Synthetic special grease for torsion dampers and vibration dampers in vehicle drive trains.

    As a manufacturer of torsion dampers and/or vibration dampers you are likely to be facing the challenge of providing lifetime lubrication and reliable operation in combination with optimum damping and reduced wear.

    The product Klübersynth H 46-702 from Klüber Lubrication offers the ideal solution for such applications. Klübersynth H 46-702 consists of fully synthetic base oils and a special lithium soap.

    Klübersynth H 46-702 shows good compatibility with frequently used plastic parts and seals.

    As we have cooperated with international OEM partners for many years, we have sound and comprehensive expertise to support you with your application

    • For-life lubricated torsion dampers, e.g. two-mass flywheels in passenger cars or trucks. Klübersynth H 46-702 has been tested on series-produced parts under conditions resembling those in the field as well as in the actual applications exposed to high-frequency vibration and high centrifugal forces. Klübersynth H 46-702 can be applied to the friction point by spatula, grease gun and automatic lubricating systems.
    • The colour of products manufactured using chemical processes may vary due to chemical/physical effects such as UV radiation. However, none of these colour variations is an indicator of altered product quality.
    • Special grease tried and tested in series application
    • Remains at the friction point even when exposed to high centrifugal forces
    • Low oil separation
    • Noise-damping during engine start, vehicle start and when operating under load
    Characteristics Klübersynth H 46-702
    Article number 012270
    Composition, thickener lithium complex soap
    Composition, type of oil  polyalkylenglycol
    Colour space beige
    Texture fibrous , homogeneous
    Service temperature, lower limit -35 °C
    Service temperature, upper limit 160 °C
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 250 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 280 0.1 mm
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 110 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 700 mm²/s
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree
    Oil separation, ASTM D6184, based on standard, 30 h, 150°C ≤ 3 by weight %
    Flow pressure, DIN 51805-2, -35°C  ≤ 1400 mba
    Dropping point, DIN ISO 2176 / IP 396 ≥ 250 °C
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months

     

    klubersynth-h-46-702.pdfklubersynth-h-46-702-en.pdf
    klubersynth-h-46-702.pdfklubersynth-h-46-702-en.pdf