Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

klubersynth ge 46-1200

Homepage > products > kluber > klubersynth ge 46-1200
Categories
  • chemicals and solvents
    • KLUBERSYNTH GE 46-1200
    KLUBERSYNTH GE 46-1200

    klubersynth ge 46-1200

    Small gear systems demand high efficiency and a lubricant with a wide temperature range along with a long service life.

    Our fully synthetic long-term fluid gear grease Klübersynth GE 46- 1200 based on a polyglycol base oil and a lithium soap thickener was especially developed to meet the tough requirements of advanced small gears.

    The combination of base oil and additives offers optimised wear protection under mixed friction and good pressure absorption capacity in the lubrication of gears. Klübersynth GE 46-1200 also offers excellent corrosion protection and good compatibility with sealing elastomers. The consistency of this fluid grease has been tuned to enable excellent backflow and hence a constant supply to the friction point.

    Please do not hesitate to contact our experts regarding the demands in your own application.

    • Reliable lubricant film formation in a wide service temperature range
    • Good wear protection and high pressure absorption capacity
    • Optimised friction behaviour leading to higher efficiency
    • Good seal life due to excellent compatibility
    • Excellent backflow to the friction point
    • Excellent ageing and oxidation resistance for long service life
    Characteristics Klübersynth GE 46-1200
    Article number 027035
    Colour space brown
    Texture homogeneous
    Density, Klüber method: PN 024, 20°C approx. 0.99 g/cm³
    NLGI grade, DIN 51818 00
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit  400 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 430 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹ ≤ 2000 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 20 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 120 mm²/s
    Copper corrosion, DIN 51811, 24 h, 100°C 1 - 100 - 24 corrosion degree
    Dropping point, DIN ISO 2176 / IP 396 ≥ 160 °C
    FZG scuffing test, DIN ISO 14635-1, A / 8.3 / 90, change of weight < 0.2 mg/kWh
    FZG scuffing test, DIN ISO 14635-1, A / 8.3 / 90, failure load stage > 12
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months

     

    klubersynth-ge-46-1200.pdf
    • We developed Klübersynth GE 46-1200 on the basis of our long experience in the lubrication of spur, bevel and worm gears. Especially for steel/steel combinations, for example in small and miniature gears, gear motors and power tool gears, Klübersynth GE 46-1200 offers outstanding performance characteristics. Medium peripheral speeds of 4-5 m/s can be effectively handled by this grease. It also provides vibration and noise damping. Klübersynth GE 46-1200 can also be used to optimise the lubrication of ball and roller guides, plain and rolling bearings, and toothed couplings from – 30 to 120 °C. It may even be applied at extreme temperatures down to -50 °C since Klübersynth GE 46-1200 will build up a loadcarrying lubricant film at these low temperature conditions.