Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

klubersynth g 4

Homepage > products > kluber > klubersynth g 4
Categories
  • chemicals and solvents
    • KLUBERSYNTH G 4
    KLUBERSYNTH G 4

    klubersynth g 4

    Synthetic high-performance gear oil.

    Klübersynth G 4 is a synthetic high-performance gear oil based on polyalphaolefin and selected additives.

    Klübersynth G 4 shows high scuffing strength. Gears are sufficiently protected against scuffing even at extremely high peak loads, vibrations or oscillations. The good wear protection of the gear components ensures that their calculated service life is achieved, leading to lower maintenance and repair costs.

    Klübersynth G 4 offers a much longer service life than mineral oils due to its excellent ageing and oxidation resistance; thus service intervals can be extended and maintenance costs reduced. The product's low foaming tendency and anti-corrosive properties enable problem-free gear operation. Klübersynth G 4 is neutral towards most sealing materials such as NBR or FKM. Oil leakage leading to contamination is prevented. Due to the product's good compatibility with brass, bronze and copper, it may be used for the lubrication of applications where the corrosion of nonferrous metals is an issue.

    The good viscosity-temperature behaviour supports the formation of a sufficient lubricant film across a wide service temperature range.

    Therefore, a single viscosity grade can cover both low and high temperatures in many applications.

    The optimised friction behaviour enabled by the carefully selected base oils reduces power loss and improves gear efficiency.

    Klübersynth G 4 is recommended and approved for ITEMA / Somet weaving machines as well as gearboxes from Stäubli and Yilmaz Redüktör.

    By using Klübersynth G 4 you can benefit from a number of advantages that will help you save costs easily and efficiently. We look forward to hearing from you.

    • Klübersynth G 4 was especially developed for the lubrication of spur, bevel and planetary gears. It can also be used for plain and rolling bearings.
    • Klübersynth G 4 can be used for immersion, immersion circulation and injection lubrication.
    • The use of drip-feed oilers, brushes, oil cans or suitable automatic lubricating systems is also possible. When using automatic lubricating systems, please note the manufacturer's instructions regarding the maximum permissible viscosity. The low-viscosity varieties are also used for oil mist lubrication.
    • Klübersynth G 4 is miscible with mineral oils. However, for the
    • Klübersynth G 4 oil to deliver its full performance, any residues of a previously used mineral oil should not exceed 5 % in quantity.For use at permanent temperatures of 80 °C max., seals made of NBR may be used. For higher temperatures, seals made of FKM should be chosen. It should be noted that elastomers from one or several manufacturers can behave differently; therefore tests should be performed.
    • For checking the contact pattern during running-in, the inspection paint Klübertop P 39-462 Spray (Art. No. 081295) can be used.
    • Sufficient scuffing protection
    • Good wear protection
    • Excellent ageing and oxidation resistance
    • Wide service temperature range due to good viscosity-temperature behaviour
    • Low foaming tendency
    • Energy savings due to optimised friction behaviour
    • Very good protection of nonferrous metals
    Characteristics Klübersynth G 4-68 Klübersynth G 4-130 Klübersynth G 4-150 Klübersynth G 4-220
    Article number 012186 012024 012285 012301
    Colour space yellow yellow yellow yellow
    Service temperature, lower limit -40 °C -40 °C -40 °C -40 °C
    Service temperature, upper limit 140 °C 140 °C 140 °C 140 °C
    Density, DIN 51757, 20°C approx 0.86 g/cm³ approx 0.86 g/cm³ approx 0.86 g/cm³ approx 0.87 g/cm³
    Flash point, DIN EN ISO 2592, Cleveland open cup ≥ 200 °C ≥ 200 °C ≥ 200 °C ≥ 230 °C
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx 10 mm²/s approx 17 mm²/s approx 19 mm²/s approx 26 mm²/s
    Kinematic viscosity, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx 68 mm²/s approx 130 mm²/s approx 150 mm²/s approx 220 mm²/s
    Viscosity index, DIN ISO 2909 ≥ 115 ≥ 130 ≥ 130 ≥ 140
    Copper corrosion, DIN EN ISO 2160, 24 h, 100°C 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree
    Pour point, DIN ISO 3016  ≤ -40 °C ≤ -40 °C ≤ -40 °C ≤ -40 °C
    FZG scuffing test, DIN ISO 14635-1, A / 8.3 / 90, failure load stage ≥ 12 ≥ 12 ≥ 12 ≥ 12

     

    klubersynth-g-4.pdfklubersynth-g-4-en.pdf
    klubersynth-g-4.pdfklubersynth-g-4-en.pdf