Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

isoflex topas nb 52

Homepage > products > kluber > isoflex topas nb 52
Categories
  • chemicals and solvents
    • ISOFLEX TOPAS NB 52

    isoflex topas nb 52

    ISOFLEX TOPAS NB 52 and ISOFLEX TOPAS NB 152 are rolling and plain bearing greases based on a synthetic hydrocarbon oil and a barium complex soap. The special barium-soap thickener used in the ISOFLEX TOPAS NB 52 and 152 greases offers good loadcarrying capacity as well as resistance to water and ambient media unlike other soap-based thickeners. Both products show good protection against corrosion as well as oxidation and ageing stability.

    The Klüber barium complex soap is ELINCS-registered and approved by GASG (Global Automotive Stakeholders Group).

    ISOFLEX TOPAS NB 152 can be used in a wide service temperature range from -40 °C to 150 °C. ISOFLEX TOPAS NB 52 is suitable for temperatures between -50 °C to 120 °C and short peak temperatures up to 150 °C depending on the application, e.g. enclosed gears, car seat adjustment mechanisms.

    ISOFLEX TOPAS NB 52 is a versatile grease for many applications, e.g.

    • rolling and plain bearings subject to high speeds and loads, also for low temperatures,
    • tooth flanks in precision gears, e.g. bevel gears in milling
    • machines, electromechanical actuators for valves, electric contacts and components to reduce insertion forces.

    In addition, ISOFLEX TOPAS NB 152 is compatible with many plastics.

    ISOFLEX TOPAS NB 152 is primarily used for rolling and plain bearings, for example wheel bearings in racing cars, fan bearings, pump bearings. The grease is also suitable for plastic/plastic or steel/plastic friction points.

    The greases are applied by spatula, brush, grease gun or cartridge. MSprays should not be exposed to direct sunlight and temperatures above 50 °C.

    ISOFLEX TOPAS NB 52 is also available in our automatic lubricant dispenser Klübermatic. Please consult the application engineering experts from Klüber Lubrication to determine whether Klübermatic might be used under the conditions in your processes.

    • Longer component life when exposed to water or aqueous media due to special thickener
    • Many years of successful use in the automotive and machine building industries
    Characteristics ISOFLEX TOPAS NB 52 ISOFLEX TOPAS NB 52 Spray ISOFLEX TOPAS NB 152 ISOFLEX TOPAS NB 152 UV
    Article number 004131 081326 004145 004351
    Composition  -   -   -  UV additive
    Composition, thickener barium complex
    soap    		 barium complex
    soap    		 barium complex
    soap    		 barium complex
    soap
    Composition, type of oil synthetic
    hydrocarbon oil    		 synthetic
    hydrocarbon oil    		 synthetic
    hydrocarbon oil    		 synthetic
    hydrocarbon oil
    Colour space beige beige beige beige
    Texture homogeneous ,
    short fibrous    		 homogeneous ,
    short fibrous    		 fibrous ,
    homogeneous    		 fibrous ,
    homogeneous
    Service temperature, lower limit -50 °C -50 °C -40 °C -40 °C
    Service temperature, upper limit  120 °C 120 °C 150 °C 150 °C
    Service temperature, DIN 51825, upper limit, rolling bearing  -   -  140 °C  - 
    Density, Klüber method: PN 024, 20°C approx 0.96 g/cm³  approx 0.96 g/cm³ approx 0.96 g/cm³  - 
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 265 0.1 mm 265 0.1 mm 265 0.1 mm 265 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 295 0.1 mm 295 0.1 mm 295 0.1 mm 295 0.1 mm
    Shear viscosity, Klüber method: PN 008@DIN 53019- 1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 4000 mPas 4000 mPas 5500 mPas 5500 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019- 1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 8000 mPas 8000 mPas 9500 mPas 9500 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx 5.9 mm²/s approx 5.9 mm²/s approx 14.5 mm²/s approx 14.5 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx 30 mm²/s approx 30 mm²/s approx 100 mm²/s approx 100 mm²/s
    Copper corrosion, DIN 51811, 24 h, 100°C 1 - 100 - 24 corrosion degree 1 - 100 - 24 corrosion degree  -   - 
    Copper corrosion, DIN 51811, 24 h, 120°C  -   -  1 - 120 - 24
    corrosion degree    		 1 - 120 - 24corrosion degree
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h 0 corrosion degree 0 corrosion degree 0 corrosion degree 0 corrosion degree
    Oil separation, ASTM D6184, 30 h, 100°C ≤ 3 by weight  % ≤ 3 by weight  % ≤ 2 by weight  % ≤ 2 by weight  %
    Dropping point, DIN ISO 2176 / IP 396 ≥ 240 °C ≥ 240 °C ≥ 240 °C ≥ 240 °C
    Oxidation stability, ASTM D942, 100 h, 99°C, pressure drop ≤ 0.3 Bar ≤ 0.3 Bar  -   - 
    Speed factor (n x dm) approx 1000000 mm/min approx 1000000 mm/min approx 600000
    mm/min    		  - 
    Water resistance, DIN 51807-1, 3 h, 90°C ≤ 1 - 90 rating ≤ 1 - 90 rating ≤ 1 - 90 rating ≤ 1 - 90 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months 24 months 36 months  - 

     

    kluber-isoflex-topas-nb-52.pdfkluber-isoflex-topas-nb-52-en2.pdf
    kluber-isoflex-topas-nb-52.pdfkluber-isoflex-topas-nb-52-en2.pdf