Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

isoflex topas l 32 n

Homepage > products > kluber > isoflex topas l 32 n
Categories
  • chemicals and solvents
    • ISOFLEX TOPAS L 32 N
    ISOFLEX TOPAS L 32 N

    isoflex topas l 32 n

    Special low-temperature greases for wide field of applications.

    As a manufacturer of automotive components, you are dealing with customers asking for reliable component function over a long serviceN life and in particular at low temperatures. By selecting an appropriate lubricant, you can meet all these ever more demanding requirements in the market. With ISOFLEX TOPAS L 32 and L 32 N, we offer you two lubricants that have both been designed for particularly low temperatures.

    ISOFLEX TOPAS L 32 and L 32 N are based on a synthetic hydrocarbon oil and a lithium soap. The corrosion protection properties of these oils are good as is their ageing and oxidation stability.

    The additional UV indicator contained in ISOFLEX TOPAS L 32 N enables reliable quality control upon application, even with minimum quantities.

    This will increase the reliability of your production process.

    You may use ISOFLEX TOPAS L 32 and L 32 N especially for the lubrication of small gears as can be found in electric actuators in vehicles (e.g. in window lifters, sun roofs, seat adjustments, headlights and ventilation flaps).

    ISOFLEX TOPAS L 32 and L 32 N have been successfully used in the automotive industry for many years and are specified and approved by most automobile makers and their suppliers worldwide.

    Further fields of application are:

    • Slideways, bowden wires, door locks
    • Rolling bearings in small motors, fans, pumps
    • Gear flanks in plastic/plastic gearboxes (e.g. POM, PA or
    • PBT) and for plastic/steel material pairings

    For applications in the car interior (e.g. ventilation flaps) with special requirements regarding neutrality in odour acc. to VDA 270, Klübersynth LMI 44-42 may be used as an alternative.

    You can apply ISOFLEX TOPAS L 32 and L 32 N by spatula, brush, grease gun or grease cartridge.

    • Low breakaway torque even at very low temperatures in small gears and actuators
    • Reduced wear due to reliable lubricating film over a wide service temperature range enabling longer component life.
    • For-life lubrication enabled by strong corrosion protection, oxidation and ageing resistance
    Characteristics SOFLEX TOPAS L 32 SOFLEX TOPAS L 32
    Article number 004337 004227
    Composition, thickener lithium soap lithium soap
    Composition, type of oil synthetic hydrocarbon oil s synthetic hydrocarbon oil s
    Colour space beige beige
    Texture homogeneous , short fibrous homogeneous , short fibrous
    Service temperature, lower limit  -60 °C -60 °C
    Service temperature, upper limit 130 °C 130 °C
    Density, Klüber method: PN 024, 20°C approx 0.84 g/cm³ approx 0.86 g/cm³
    NLGI grade, DIN 51818 2 2
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit 265 0.1 mm 265 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit  295 0.1 mm  295 0.1 mm 
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 2000 mPas 2000 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 4500 mPas 5000 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx 3.8 mm²/s approx 3.8 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx 17 mm²/s approx 17 mm²/s
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree ≤ 1 corrosion degree
    Flow pressure, DIN 51805-2, -35°C ≤ 450 mbar ≤ 450 mbar
    Dropping point, DIN ISO 2176 / IP 396 ≥ 185 °C ≥ 185 °C
    Speed factor (n x dm) 1000000 mm/min 1000000 mm/min 
    Water resistance, DIN 51807-1, 3 h, 90°C  ≤ 1 - 90  rating ≤ 1 - 90  rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 36 months 36 months

     

    isoflex-topas-l-32-n.pdfisoflex-topas-l-32-n-en.pdf
    isoflex-topas-l-32-n.pdfisoflex-topas-l-32-n-en.pdf