Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

centoplex 24 dl

Homepage > products > kluber > centoplex 24 dl
Categories
  • chemicals and solvents
    • CENTOPLEX 24 DL
    CENTOPLEX 24 DL

    centoplex 24 dl

    CENTOPLEX 24 DL is a low-temperature grease based on mineral oils with good oxidation resistance and a lithium calcium soap. The product's good mechanical stability enables long-term lubrication at normal temperatures and loads.

    • Low-temperature grease.
    • Dynamically light.
    • Long-term lubrication for simple applications.
    • Multipurpose grease.
    Characteristics CENTOPLEX 24 DL
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 2500 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 4500 mPas
    Copper corrosion, DIN 51811, 24 h, 80°C 1 - 80 - 24 corrosion degree
    Oil separation, DIN 51817 N, 168 h, 40°C ≤ 6 % by weight
    Flow pressure, DIN 51805-2, -45°C ≤ 1400 mbar
    Dropping point, DIN ISO 2176 / IP 396 ≥ 170 °C
    Water resistance, DIN 51807-1, 3 h, 40°C ≤ 1 - 40 rating
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 24 months

     

    kluber-centoplex-24-dl.pdf
    • CENTOPLEX 24 DL can be used as a low-temperature grease in many different plain and rolling bearing applications as well as in lubrication points with low torques and/or high rotational speeds.
    • CENTOPLEX 24 DL has proven successful in the lubrication of door handles and locking mechanisms in motor vehicles, windshield wipers and small gears.
    • For long-term lubrication, temperature at the friction point should be < 70 °C. We will be pleased to advise you on relubrication intervals and quantities.