Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

barrierta kl 092

Homepage > products > kluber > barrierta kl 092
Categories
  • chemicals and solvents
    • BARRIERTA KL 092

    barrierta kl 092

    BARRIERTA is Europe's oldest high-quality brand of hightemperature lubricants based on perfluorinated polyether oil (PFPE). Today the name of BARRIERTA is widely regarded as synonymous with long-term stability and thermal resistance. BARRIERTA greases are the first choice of lubrication experts in many sectors worldwide. BARRIERTA K greases enable long-term use under high temperatures and influence of media, while at the same time requiring low running torques at low temperatures. This was made possible by Klüber's careful selection of raw materials and the specifically developed thickener.

    • Rolling bearings and guideways 
      BARRIERTA K greases are highly suitable for the long-term lubrication of rolling and plain bearings, where only low driving power is available and where long-term stability is required under changing environmental loads. Even at extremely low temperatures, BARRIERTA K greases are soft enough so as not to overload lowpower drive units, while on the other hand they withstand temperatures as high as 200°C and beyond. BARRIERTA K greases are used for a wide range of applications as for-life lubricants in automotive, electrical and precision engineering.
    • Valves and seals
      The BARRIERTA K greases good temperature resistance and their compatibility with plastics and elastomers – which is typical of PFPE lubricants – make them highly suitable for the lubrication of enginevalves and seals as are found in hydraulic cylinders. BARRIERTA KM greases enable long runtimes with low noise generation and low friction coefficients. The resistance of BARRIERTA KM 192 against brake fluids, type DOT 3, 4, 5 and 5.1, has been confirmed in an individual test.
    • Compatibility with elastomers and plastics
      BARRIERTA K grease stand out for their neutral behaviour towards elastomers and plastics. Owing to the many different varieties of elastomers and plastics and varying operating conditions, we recommend checking their compatibility with the component material prior to series application.

    Long component life

    • over a wide service temperature range
    • when exposed to aggressive chemical agents
    • due to a long calculated grease life

    Improved component performance

    • due to low starting torques even at low temperatures
    • due to resistance to high speeds
    • due to friction values being largely independent of temperature
    Characteristics BARRIERTA KM 19 BARRIERTA KL 092
    Article Number 090122 090242
    Composition, Solid Lubricant PTFE PTFE
    Composition, Type Of Oil PFPE PFPE
    Service Temperature, Lower Limit -50 °C -65 °C
    Service Temperature, Upper Limit 260 °C 220 °C
    Density, Klüber Method: PN 024, 20°C approx. 1.9 g/cm³ approx. 1.94 g/cm³
    NLGI Grade, DIN 51818 2  2 
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, lower limit 4000 mPas 2000 mPas
    Shear viscosity, Klüber method: PN 008@DIN 53019-1, equipment: rotational viscometer, 25°C, 300 s⁻¹, upper limit 8000 mPas 5000 mPas
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 34 mm²/s approx. 26 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 190 mm²/s approx. 90 mm²/s
    SKF-EMCOR, DIN 51802, Klüber method: distilled water, 168 h ≤ 1 corrosion degree  ≤ 1 corrosion degree
    Flow pressure, DIN 51805-2, -50°C ≤ 1400 mbar  -
    Flow pressure, DIN 51805-2, -60°C   ≤ 1400 mbar
    Low temperature torque, IP 186, based on standard, equipment: IP 186 / LT3, -65°C, running torque   ≤ 100 mNm
    Low temperature torque, IP 186, based on standard, equipment: IP 186 / LT3, -65°C, starting torque   ≤ 1000 mNm
    Low temperature torque, IP 186, -40°C, running torque ≤ 100 mNm  
    Low temperature torque, IP 186, -40°C, starting torque ≤ 1000 mNm  
    Speed factor (n x dm) approx. 600000 mm/min 300000 mm/min
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 60 months 60 months

     

    kluber-barrierta-kl-092.pdf