Logo

Buyonsell is one of the leading lubricant and engine oil suppliers in Turkey with its expertise, experience and vast knowledge since the 2000s.

Contact Information

Address:

Fevzi Çakmak Mahallesi Ahmet Petekçi Caddesi No:40 42050 Karatay/Konya/Turkiye

E-Mail: export@buyonsell.com
Telephone: +90 332 347 02 02

Social Media

Logo

amblygon ta 30-1 ta

Homepage > products > kluber > amblygon ta 30-1 ta
Categories
  • chemicals and solvents
    • AMBLYGON TA 30-1 TA

    amblygon ta 30-1 ta

    AMBLYGON TA 30/1 and TA 30/2 are long-term and hightemperature lubricating greases based on mineral oil and polyurea. These lubricating greases are used for long-term lifetime lubrication in the machine-building sector covering a wide service temperature range up to 160 °C. AMBLYGON TA 30/1 and TA 30/2 offer good adhesion, resistance to hot water and diluted alkaline and acid solutions. AMBLYGON TA 30/1 and TA 30/2 are resistant to oxidation and ageing and protect against corrosion.

    AMBLYGON TA 30/1 and TA 30/2 lubricate bearings and joints subject to high loads and temperatures, for example in:

    • conveyors
    • rollers in continuous casting machines
    • kilns (rotary tubular kilns)
    • water pumps
    • hot rollers
    • tarmac laying machines
    • gate valves
    • seals
    • washing machines and dishwashers
    • impact mechanisms in power tools
    • wheel bearings, joints, hinges
    • king pins
    • fully enclosed rolling bearings
    • block presses

    AMBLYGON TA 30/1 and TA 30/2 are also used in combination with mineral-oil-resistant elastomer seals.

    • Good resistance to ambient media, water and water steam
    • Good corrosion protection
    • Good adhesion
    • Good sealing effect
    Characteristics AMBLYGON TA 30/1 AMBLYGON TA 30/2
    Article number 020157 020133
    Composition, thickener polyurea polyurea
    Composition, type of oil mineral oil mineral oil
    Service temperature, lower limit  -20 °C -15 °C
    Service temperature, upper limit 160 °C 160 °C
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, lower limit  310 0.1 mm 285 0.1 mm
    Worked penetration, DIN ISO 2137 / ASTM D217, 25°C, upper limit 340 0.1 mm 315 0.1 mm
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 100°C approx. 32 mm²/s approx. 32 mm²/s
    Kinematic viscosity of the base oil, DIN EN ISO 3104 / DIN 51562-1 / ASTM D445 / ASTM D7042, 40°C approx. 500 mm²/s approx. 500 mm²/s
    Dropping point, DIN ISO 2176 / IP 396 ≥ 220 °C ≥ 250 °C
    Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. 60 months 60 months

     

    kluber-amblygon-ta-30-1.pdf